Hetzner - CX22 Yab
December 1st 2024
This is the yab (yabs.sh results) for tests that were run on a Hetzner server on December 1st 2024.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Hetzner Coupons
Link: https://hetzner.cloud/?ref=fBHsgnqfCF1I
Value: 20€
Sign up using the link and receive 20€ in cloud credits.
Server
| Provider | Hetzner |
|---|---|
| VPS Plan | CX22 |
| OS Version | Debian GNU/Linux 10 (buster) |
| Data Center Location | Nuremberg, Bavaria, Germany |
Specs
| Processor | Intel Xeon Processor (Skylake, IBRS, no TSX) |
|---|---|
| CPU cores | 2 @ 2294.608 MHz |
| RAM | 3.8 GiB |
| Disk | 39.3 GB |
| Swap | 0.0 B |
| Kernel | 4.19.0-23-amd64 |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ❌ Disabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2024-06-09",
"time": "20241201-232203",
"os": {
"arch": "x64",
"distro": "Debian GNU/Linux 10 (buster)",
"kernel": "4.19.0-23-amd64",
"uptime": 599202.51,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "Intel Xeon Processor (Skylake, IBRS, no TSX)",
"cores": 2,
"freq": "2294.608 MHz",
"aes": true,
"virt": false
},
"mem": {
"ram": 3943152,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 39299250,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "Hetzner Online GmbH",
"asn": "AS24940 Hetzner Online GmbH",
"org": "Hetzner",
"city": "Nuremberg",
"region": "Bavaria",
"region_code": "BY",
"country": "Germany"
},
"partition": "/dev/sda1",
"fio": [
{
"bs": "4k",
"speed_r": 108354,
"iops_r": 27088,
"speed_w": 108640,
"iops_w": 27160,
"speed_rw": 216994,
"iops_rw": 54248,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 652213,
"iops_r": 10190,
"speed_w": 655645,
"iops_w": 10244,
"speed_rw": 1307858,
"iops_rw": 20434,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 855835,
"iops_r": 1671,
"speed_w": 901308,
"iops_w": 1760,
"speed_rw": 1757143,
"iops_rw": 3431,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 999294,
"iops_r": 975,
"speed_w": 1065847,
"iops_w": 1040,
"speed_rw": 2065141,
"iops_rw": 2015,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "2.94 Gbits/sec",
"recv": "3.92 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Eranium",
"loc": "Amsterdam, NL (100G)",
"send": "5.64 Gbits/sec",
"recv": "10.1 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "busy ",
"recv": "1.75 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "Singapore, SG (10G)",
"send": "busy ",
"recv": "1.09 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "busy ",
"recv": "937 Mbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Leaseweb",
"loc": "NYC, NY, US (10G)",
"send": "1.85 Gbits/sec",
"recv": "2.00 Gbits/sec",
"latency": "--"
},
{
"mode": "IPv4",
"provider": "Edgoo",
"loc": "Sao Paulo, BR (1G)",
"send": "604 Mbits/sec",
"recv": "421 Mbits/sec",
"latency": "--"
}
],
"geekbench": [
],
"runtime": {
"start": 1733084523,
"end": 1733085080,
"elapsed": 557
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 108.4 MB/s 27.088k IOPS | 652.2 MB/s 10.19k IOPS | 855.8 MB/s 1.671k IOPS | 999.3 MB/s 0.975k IOPS |
| Write | 108.6 MB/s 27.16k IOPS | 655.6 MB/s 10.244k IOPS | 901.3 MB/s 1.76k IOPS | 1065.8 MB/s 1.04k IOPS |
| Total | 217.0 MB/s 54.248k IOPS | 1307.9 MB/s 20.434k IOPS | 1757.1 MB/s 3.431k IOPS | 2065.1 MB/s 2.015k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Edgoo Sao Paulo, BR (1G) |
421 Mbits/sec | 604 Mbits/sec |
|
Clouvider London, UK (10G) |
4014 Mbits/sec | 3011 Mbits/sec |
|
Leaseweb NYC, NY, US (10G) |
2048 Mbits/sec | 1894 Mbits/sec |
|
Eranium Amsterdam, NL (100G) |
10342 Mbits/sec | 5775 Mbits/sec |
|
Leaseweb Singapore, SG (10G) |
1116 Mbits/sec | busy |
|
Uztelecom Tashkent, UZ (10G) |
1792 Mbits/sec | busy |
|
Clouvider Los Angeles, CA, US (10G) |
937 Mbits/sec | busy |