1blu - VPS SX (September 2023), switched to KVM Yab
September 21st 2023
This is the yab (yabs.sh results) for tests that were run on a 1blu server on September 21st 2023.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
Server
| Provider | 1blu |
|---|---|
| VPS Plan | VPS SX (September 2023), switched to KVM |
| OS Version | Debian GNU/Linux 12 (bookworm) |
| Data Center Location | Berlin, Germany |
Specs
| Processor | AMD EPYC Processor (with IBPB) |
|---|---|
| CPU cores | 4 @ 2495.312 MHz |
| RAM | 7.8 GiB |
| Disk | 122.3 GB |
| Swap | 975.0 MiB |
| Kernel | 6.1.0-12-amd64 |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ❌ Disabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2023-09-06",
"time": "20230921-232520",
"os": {
"arch": "x64",
"distro": "Debian GNU/Linux 12 (bookworm)",
"kernel": "6.1.0-12-amd64",
"uptime": 86.5,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": false
},
"cpu": {
"model": "AMD EPYC Processor (with IBPB)",
"cores": 4,
"freq": "2495.312 MHz",
"aes": true,
"virt": false
},
"mem": {
"ram": 8131232,
"ram_units": "KiB",
"swap": 998396,
"swap_units": "KiB",
"disk": 122281592,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv4",
"isp": "EVANZO e-commerce GmbH",
"asn": "AS42730 EVANZO e-commerce GmbH",
"org": "EVANZO e-commerce GmbH",
"city": "Berlin",
"region": "Land Berlin",
"region_code": "BE",
"country": "Germany"
},
"fio": [
{
"bs": "4k",
"speed_r": 68451,
"iops_r": 17112,
"speed_w": 68656,
"iops_w": 17164,
"speed_rw": 137107,
"iops_rw": 34276,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 460512,
"iops_r": 7195,
"speed_w": 462936,
"iops_w": 7233,
"speed_rw": 923448,
"iops_rw": 14428,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 506415,
"iops_r": 989,
"speed_w": 533322,
"iops_w": 1041,
"speed_rw": 1039737,
"iops_rw": 2030,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 466889,
"iops_r": 455,
"speed_w": 497983,
"iops_w": 486,
"speed_rw": 964872,
"iops_rw": 941,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "905 Mbits/sec",
"recv": "239 Mbits/sec",
"latency": "16.1 ms"
},
{
"mode": "IPv4",
"provider": "Scaleway",
"loc": "Paris, FR (10G)",
"send": "586 Mbits/sec",
"recv": "215 Mbits/sec",
"latency": "15.1 ms"
},
{
"mode": "IPv4",
"provider": "NovoServe",
"loc": "North Holland, NL (40G)",
"send": "busy ",
"recv": "busy ",
"latency": "7.66 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "822 Mbits/sec",
"recv": "56.5 Mbits/sec",
"latency": "99.7 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "NYC, NY, US (10G)",
"send": "630 Mbits/sec",
"recv": "120 Mbits/sec",
"latency": "85.2 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Dallas, TX, US (10G)",
"send": "809 Mbits/sec",
"recv": "37.5 Mbits/sec",
"latency": "118 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "773 Mbits/sec",
"recv": "46.2 Mbits/sec",
"latency": "146 ms"
}
],
"geekbench": [
{
"version": 6,
"single": 1126,
"multi": 3395,
"url": "https://browser.geekbench.com/v6/cpu/2706184"
}
],
"runtime": {
"start": 1695335120,
"end": 1695335780,
"elapsed": 660
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Geekbench 6
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v6/cpu/2706184 |
|---|---|
| Multi Core | 3395 |
| Single Core | 1126 |
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 68.5 MB/s 17.112k IOPS | 460.5 MB/s 7.195k IOPS | 506.4 MB/s 0.989k IOPS | 466.9 MB/s 0.455k IOPS |
| Write | 68.7 MB/s 17.164k IOPS | 462.9 MB/s 7.233k IOPS | 533.3 MB/s 1.041k IOPS | 498.0 MB/s 0.486k IOPS |
| Total | 137.1 MB/s 34.276k IOPS | 923.4 MB/s 14.428k IOPS | 1039.7 MB/s 2.03k IOPS | 964.9 MB/s 0.941k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Scaleway Paris, FR (10G) |
215 Mbits/sec | 586 Mbits/sec |
|
Clouvider London, UK (10G) |
239 Mbits/sec | 905 Mbits/sec |
|
Clouvider NYC, NY, US (10G) |
120 Mbits/sec | 630 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
57 Mbits/sec | 822 Mbits/sec |
|
Clouvider Dallas, TX, US (10G) |
38 Mbits/sec | 809 Mbits/sec |
|
NovoServe North Holland, NL (40G) |
busy | busy |
|
Clouvider Los Angeles, CA, US (10G) |
46 Mbits/sec | 773 Mbits/sec |
