Ramnode - KVM Standard 8GB Yab
December 8th 2023
Go to Ramnode
VPSBenchmarks
Verified
This is the yab (yabs.sh results) for tests that were run on a Ramnode server on December 8th 2023.
yabs.sh is an easy to run and powerful script that runs a full set of benchmarks on your server. Get Started with Yabs. You can collect, organize and visualize your yabs for free at VPSBenchmarks.
Go to your Dashboard to manage your yabs.
Compare Geekbench, Fio and Iperf3 benchmark results from the Yabs comparison page.
This Yab was run as part of VPSBenchmarks performance trial.
Review all performance grades and test results for this server
on the Ramnode - KVM Standard 8GB trial page.
Trial performance score: 26 / 100
Server
| Provider | Ramnode |
|---|---|
| VPS Plan | KVM Standard 8GB |
| OS Version | Ubuntu 22.04.3 LTS |
| Data Center Location | New York, New York, United States |
Specs
| Processor | AMD EPYC Processor (with IBPB) |
|---|---|
| CPU cores | 4 @ 2099.998 MHz |
| RAM | 7.8 GiB |
| Disk | 182.8 GB |
| Swap | 0.0 B |
| Kernel | 5.15.0-48-generic |
| AES-NI | ✔ Enabled |
| VM-x/AMD-V | ✔ Enabled |
| VM Type |
Raw Yabs.sh Output
{
"version": "v2023-11-30",
"time": "20231208-044625",
"os": {
"arch": "x64",
"distro": "Ubuntu 22.04.3 LTS",
"kernel": "5.15.0-48-generic",
"uptime": 46857.68,
"vm": "KVM"
},
"net": {
"ipv4": true,
"ipv6": true
},
"cpu": {
"model": "AMD EPYC Processor (with IBPB)",
"cores": 4,
"freq": "2099.998 MHz",
"aes": true,
"virt": true
},
"mem": {
"ram": 8140292,
"ram_units": "KiB",
"swap": 0,
"swap_units": "KiB",
"disk": 182838298,
"disk_units": "KB"
},
"ip_info": {
"protocol": "IPv6",
"isp": "InMotion Hosting",
"asn": "AS3842 InMotion Hosting, Inc.",
"org": "RAMNODE",
"city": "New York",
"region": "New York",
"region_code": "NY",
"country": "United States"
},
"partition": "/dev/vda1",
"fio": [
{
"bs": "4k",
"speed_r": 7525,
"iops_r": 1881,
"speed_w": 7556,
"iops_w": 1889,
"speed_rw": 15081,
"iops_rw": 3770,
"speed_units": "KBps"
},
{
"bs": "64k",
"speed_r": 74934,
"iops_r": 1170,
"speed_w": 75328,
"iops_w": 1177,
"speed_rw": 150262,
"iops_rw": 2347,
"speed_units": "KBps"
},
{
"bs": "512k",
"speed_r": 26531,
"iops_r": 51,
"speed_w": 28347,
"iops_w": 55,
"speed_rw": 54878,
"iops_rw": 106,
"speed_units": "KBps"
},
{
"bs": "1m",
"speed_r": 309621,
"iops_r": 302,
"speed_w": 330241,
"iops_w": 322,
"speed_rw": 639862,
"iops_rw": 624,
"speed_units": "KBps"
}
],
"iperf": [
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "800 Mbits/sec",
"recv": "112 Mbits/sec",
"latency": "70.3 ms"
},
{
"mode": "IPv4",
"provider": "Scaleway",
"loc": "Paris, FR (10G)",
"send": "busy ",
"recv": "busy ",
"latency": "79.9 ms"
},
{
"mode": "IPv4",
"provider": "NovoServe",
"loc": "North Holland, NL (40G)",
"send": "785 Mbits/sec",
"recv": "371 Mbits/sec",
"latency": "79.5 ms"
},
{
"mode": "IPv4",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "busy ",
"recv": "21.6 Mbits/sec",
"latency": "270 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "NYC, NY, US (10G)",
"send": "800 Mbits/sec",
"recv": "514 Mbits/sec",
"latency": "2.20 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Dallas, TX, US (10G)",
"send": "830 Mbits/sec",
"recv": "231 Mbits/sec",
"latency": "33.6 ms"
},
{
"mode": "IPv4",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "688 Mbits/sec",
"recv": "busy ",
"latency": "62.3 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "London, UK (10G)",
"send": "813 Mbits/sec",
"recv": "118 Mbits/sec",
"latency": "70.6 ms"
},
{
"mode": "IPv6",
"provider": "Scaleway",
"loc": "Paris, FR (10G)",
"send": "busy ",
"recv": "busy ",
"latency": "83.4 ms"
},
{
"mode": "IPv6",
"provider": "NovoServe",
"loc": "North Holland, NL (40G)",
"send": "786 Mbits/sec",
"recv": "443 Mbits/sec",
"latency": "79.6 ms"
},
{
"mode": "IPv6",
"provider": "Uztelecom",
"loc": "Tashkent, UZ (10G)",
"send": "busy ",
"recv": "49.9 Mbits/sec",
"latency": "289 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "NYC, NY, US (10G)",
"send": "798 Mbits/sec",
"recv": "505 Mbits/sec",
"latency": "2.10 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "Dallas, TX, US (10G)",
"send": "845 Mbits/sec",
"recv": "131 Mbits/sec",
"latency": "31.8 ms"
},
{
"mode": "IPv6",
"provider": "Clouvider",
"loc": "Los Angeles, CA, US (10G)",
"send": "840 Mbits/sec",
"recv": "86.0 Mbits/sec",
"latency": "62.3 ms"
}
],
"geekbench": [
{
"version": 5,
"single": 485,
"multi": 1402,
"url": "https://browser.geekbench.com/v5/cpu/22025167"
},
{
"version": 6,
"single": 579,
"multi": 1712,
"url": "https://browser.geekbench.com/v6/cpu/3900974"
}
],
"runtime": {
"start": 1702039585,
"end": 1702041205,
"elapsed": 1620
}
}
Results Summary
The scale in the charts between 0 and 100 represents the performance of this server for each metric relative to the performance of all other servers tested recently at VPSBenchmarks for that same metric.
- 100 means the server is the fastest for this metric.
- 50 means the server has exactly median performance for this metric.
- 0 means the server is the slowest for this metric.
Geekbench 5
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v5/cpu/22025167 |
|---|---|
| Multi Core | 1402 |
| Single Core | 485 |
Geekbench 6
Geekbench measures your processor's single-core and multi-core power.
| Full Test | https://browser.geekbench.com/v6/cpu/3900974 |
|---|---|
| Multi Core | 1712 |
| Single Core | 579 |
Fio
This Fio test evaluates disk performance in 4 random read and write runs with different block sizes, 50% reads and 50% writes.
All fio tests below run in asynchronous direct mode using libaio and use 2 execution threads regardless of the size of the server.
| 4k | 64k | 512k | 1m | |
|---|---|---|---|---|
| Read | 7.5 MB/s 1.881k IOPS | 74.9 MB/s 1.17k IOPS | 26.5 MB/s 0.051k IOPS | 309.6 MB/s 0.302k IOPS |
| Write | 7.6 MB/s 1.889k IOPS | 75.3 MB/s 1.177k IOPS | 28.3 MB/s 0.055k IOPS | 330.2 MB/s 0.322k IOPS |
| Total | 15.1 MB/s 3.77k IOPS | 150.3 MB/s 2.347k IOPS | 54.9 MB/s 0.106k IOPS | 639.9 MB/s 0.624k IOPS |
Iperf3 ipv4
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Scaleway Paris, FR (10G) |
busy | busy |
|
Clouvider London, UK (10G) |
112 Mbits/sec | 800 Mbits/sec |
|
Clouvider NYC, NY, US (10G) |
514 Mbits/sec | 800 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
22 Mbits/sec | busy |
|
Clouvider Dallas, TX, US (10G) |
231 Mbits/sec | 830 Mbits/sec |
|
NovoServe North Holland, NL (40G) |
371 Mbits/sec | 785 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
busy | 688 Mbits/sec |
Iperf3 ipv6
Iperf3 tests download and upload speeds to various locations using 8 parallel threads.
| Download | Upload | |
|---|---|---|
|
Scaleway Paris, FR (10G) |
busy | busy |
|
Clouvider London, UK (10G) |
118 Mbits/sec | 813 Mbits/sec |
|
Clouvider NYC, NY, US (10G) |
505 Mbits/sec | 798 Mbits/sec |
|
Uztelecom Tashkent, UZ (10G) |
50 Mbits/sec | busy |
|
Clouvider Dallas, TX, US (10G) |
131 Mbits/sec | 845 Mbits/sec |
|
NovoServe North Holland, NL (40G) |
443 Mbits/sec | 786 Mbits/sec |
|
Clouvider Los Angeles, CA, US (10G) |
86 Mbits/sec | 840 Mbits/sec |